G-Series G30-900 Download Section
The latest Garrett technologies offer many advanced features.
Garrett G Series G30-900 Reverse Rotation Turbo
SKU G30-900RR
Garrett G Series G30-900 Reverse Rotation Turbo
NEED HELP? CALL A PRODUCT EXPERT NOW AT 602-437-2101
As low as
$1,877.74
In stock
SKU
G30-900RR
Garrett G Series G30-900 Reverse Rotation Turbo
The Garrett G30-900 Is an Impressive Power Producer
Introducing performance out of a package you never thought possible. This is the largest and highest flowing '30' size turbo in history. Garrett engineering developed this as a clean sheet product that's tailored to meet the demands of hard-core racing enthusiasts while providing industry-leading power capability in a small package.Â
The G-Series G30-900 turbocharger is compatible with 2.0L – 3.5L engine displacements and capable of producing up to 900 horsepower. It sits right between the G30-770 and the G35-900. If you're looking for a turbo that can push 900hp, then this is a good option. If you don't quite need 900hp, then we highly recommend the G30-770. That turbo is one of the best in the G Series lineup.
G Series 30 turbochargers are highly efficient and will outflow all comparable products on the market. New compressor and turbine aero combined with high-temperature resistant materials allowed engineers to push the limits of performance. A new name designates a new generation of industry-leading technology and innovation.
Supercore: Standard or Reverse Rotation
- Horsepower: 550 – 900
- Displacement: 2.0L – 3.5L
Features
- Garrett G Series compressor aerodynamics for maximum horsepower
- 62mm turbocharger compressor option
- New turbine wheel aero constructed of MAR-M alloy rated for up to 1050 degrees C
- Stainless steel turbine housing options rated for up to 1050 degrees C
- Oil restrictor and water fittings included
- Fully-machined speed sensor and pressure ports
G-Series G30-900 Reference Data
The latest Garrett technologies offer many advanced features.
| G30-900 REFERENCE DATA | COMPRESSOR | TURBINE | |||||
|---|---|---|---|---|---|---|---|
| INDUCER | EXDUCER | TRIM | A/R | INDUCER | EXDUCER | TRIM | |
| 62mm | 76mm | 65 | 0.72 | 60mm | 55mm | 84 | |
| G30-900 STANDARD ROTATION SUPERCORE PN | TURBINE KIT PN | A/R | INLET | OUTLET | WASTEGATE | DIVIDED | |
| 880693-5003S | 740902-0086 | 0.61 | V-Band | V-Band | Free Float | N | |
| 740902-0087 | 0.83 | V-Band | V-band | Free Float | N | ||
| 740902-0088 | 1.01 | V-Band | V-band | Free Float | N | ||
| 740902-0089 | 1.21 | V-Band | V-band | Free Float | N | ||
| G30-900 REVERSE ROTATION SUPERCORE PN | TURBINE KIT PN | A/R | INLET | OUTLET | WASTEGATE | DIVIDED | |
| 880694-5003S | 740902-0096 | 0.61 | V-Band | V-Band | Free Float | N | |
| 740902-0097 | 0.83 | V-Band | V-band | Free Float | N | ||
| 740902-0098 | 1.01 | V-Band | V-band | Free Float | N | ||
| 740902-0099 | 1.21 | V-Band | V-band | Free Float | N | ||
| *Additional turbine housing options coming soon. Please check GarrettMotion.com for latest updates. | |||||||
G-Series G30-900 Compressor Map
G Series G30-900 Exhaust Flow Chart
Understanding the Name G30-900
The letter G designates 81 years of Garrett® heritage. The number 30 classifies the size of the frame. The remaining 3 digits identify the max horsepower rating of the turbocharger (ie 900).
Compressor Aero
Forged fully-machined compressor wheel and new aerodynamics increase maximum horsepower output and boost response. The CFD (computational fluid dynamics) engineered compressor wheel increases airflow up to 15% for 60mm and 30% for 67mm with 79-80% efficiency. (Compared to GTX GenII)
Available in standard rotation and reverse rotation options for enthusiasts that want the perfect twin turbo installation or a single reverse rotation turbo for applications with installation restrictions.
Speed Sensor
The compressor housing features a fully machined ported shroud to help reduce compressor surge. A fully machined speed sensor port provides enthusiasts the option to add the new G Series speed sensor to measure turbocharger shaft speed, a key factor in determining ideal operating conditions.
The new speed sensor is easy to install and does not need to be adjusted for length like previous sensors. Simply remove and plug, then insert the speed sensor and tighten the bolt. The new speed sensor is sold separately and is not compatible with GT and GTX sensors due to the new design and sizing. The addition of an o-ring between the compressor housing and backplate reduces the possibility of boost pressure leakage.
Center Housing
A new one-piece center housing and backplate increase durability and product safety by reducing the number of failure points associated with the turbocharger. The center housing to turbine housing v-band connection allows for 360-degree orientation when installing with Garrett non-wastegated turbine housings.
Water Jackets
Four large water jacket ports increase cooling capacity and allow enthusiasts to customize water line routing to help improve the installation process. The turbocharger comes with two -6AN water fittings and two plugs.
*Recommended to install waterlines on opposite sides of the housing.
Oil Passage
A single-stage oil passage directs pressurized oil to the new oil cavity ensuring proper bearing lubrication at both sides of the cartridge. Each turbocharger includes (1) -4AN oil restrictor fitting with a 1mm orifice to provide the turbo with the recommended 40psi of oil pressure.
Rotating Group – Twin Piston Rings
A shorter bearing cartridge allows us to incorporate twin piston rings on both sides of the shaft wheel assembly. This will reduce the likeliness of oil leakage at the seals from the center housing to the compressor and or turbine stage.
Turbine Wheel Aero
The turbine wheel features all new aerodynamics to improve flow and boost response. The new turbine wheel is made of Mar-M super alloy and is capable of handling exhaust gas temperatures up to 1050 degrees C. The new turbine wheel flows 15-20% more than GTX and has a peak efficiency of 74%.
Turbine Housings
All G Series Turbine housings are made from stainless steel to provide ultimate durability and temperature resistance up to 1050 degrees C. Internally wastegated housings are compact, efficient, and designed with maximum bypass port size to reduce boost creep and provide better boost control. Turbine housings are available in a variety of wastegated and non-wastegated, open volute, T25, and V-band configurations so be sure to order the correct part for your application.
If you have questions about this product or its installation, contact us.Â
SKU
G30-900RR
WEIGHT
30.000000
BRAND
Garrett
Write A Review
You may also like:
Universal Installation Parts
2.5" 45 Degree Coupler Extra Long
$49.99
Full-Race 304 Stainless Steel 3" V-Band Flange Kit
$70.00
T3 Turbine Flange Gasket
$12.00
10mm M10 Inconel Turbo Stud Hardware Kit T3 T4 Turbos
$59.99
T3 T4 Oil Feed Flange
$25.00
Silicone 4" 45 Degree Intake Elbow / Coupler
$44.99
Full-Race T4 Divided 5 Layer Inconel Gasket
$19.99
3" V-Band Flanges
$25.00
2.5" Silicone Hump Hose
$24.99
4" V-band Flange Kit
$95.00
Full-Race Billet Medium GT Oil Drain Flange (1/2" NPT)
$28.99
Large GT/GTX Oil Drain Flange
$25.00
Full-Race Billet Vacuum / Boost Reference Manifold Block
$49.99
Full-Race 304 Stainless Steel 4" V-band Flanges
$70.00
For SHOP OWNERs
& KIT BUILDERs
Full-Race Motorsports is the most
trusted name in turbocharging.
M-F: 8AM-4PM MST