Experts in Turbocharging since 2003

Build Now, Pay Later

The offer is valid for all orders within the USA. For other countries, the cost will be automatically calculated on checkout.

Free Shipping Over $249

Eligibility: 68 Million in the US. Also allows UK, Canadian and Australian Forces.
Included:
  • - Active Duty (currently serving in the Armed Forces)
  • - Veterans (formerly served in the Armed Forces)
  • - Dependents (spouse or child of above)
Military Discount

Turbosmart GenV 38mm UltraGate Wastegate

SKU TS-ULTRAGATE-GENV

38mm Turbosmart Gen V Ultra Gate Wastegate

NEED HELP? CALL A PRODUCT EXPERT NOW AT 602-437-2101
As low as $339.95
In stock
SKU
TS-ULTRAGATE-GENV

38mm Turbosmart Gen V Ultra Gate Wastegate

38mm Turbosmart Gen V Ultra Gate Wastegate

The Ultra-Gate38 is a 38mm external wastegate for applications which utilize the traditional 2 bolt WG aka “deltagate flange”. Designed with minimum size and maximum flow in mind, the new Ultra-Gate38 is smaller and lighter than the previous model.  The Gen V features Turbosmart’s unique locking collar design for quicker spring changes and a one piece, stainless steel valve.

The Ultra-Gate38 Features:

  • 38mm valve size
  • Popular 2-bolt flange fitting to suit 1 5/8” OD dump tube
  • Locking collar for compact size and easy spring changes
  • Solid, one-piece coated valve
  • Advanced silicone Nomex diaphragm

APPLICATION:

For use on older turbocharged vehicles with a 2 bolt 38mm “Delta Gate” external wastegate. Inlet Flanges suit 1.50” outside diameter pipe.

SUPPLIED WITH:

Supplied with valve seat, gaskets, all the necessary nuts and bolts, 2 x 1/8″ NPT Vacuum Fittings, Blanking Plugs, Collar removal tool. Spring options available to customer specifications.

NEW Gen V Wastegate Background

Turbosmart’s new wastegates are a direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, completely variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports, and are provided with a range of springs.  Some models are also available in Motorsport and Gas-only versions for those requiring specific applications.

IMPORTANT NOTES ON SETTING THE WASTEGATE ACTUATOR SPRING PRESSURE
This external wastegate actuator allows for different combinations of spring pressures. All possible spring combinations are shown in the table below. The tuner can use a combinations of up to 3 springs to achieve the desired base boost pressure. To aid in the identification of these springs they are supplied color coded. If this color coding is not clear please use the dimensions in the following table to identify the spring. The springs chosen should be rated to the lowest boost level desired.

 

  • Fitting a heavier wastegate actuator spring may cause a higher than expected increase in boost pressure.
  • Turbosmart recommends adjusting your boost controller back to its minimum setting and measuring the new minimum boost pressure achieved by the new spring, before increasing your boost pressure again.
  • Use of a turbocharger speed sensor is a good idea if you plan to run very high boost levels

SKU

TS-ULTRAGATE-GENV

WEIGHT

5.000000

BRAND

Turbosmart

Write A Review

For SHOP OWNERs
& KIT BUILDERs

Full-Race Motorsports is the most
trusted name in turbocharging.

Wholesale Inquiries
M-F: 8AM-4PM MST