Injector Dynamics ID2600-XDS Fuel Injectors
Injector Dynamics ID2600-XDS Fuel Injector Specifications
Nominal Flow Rate – 2600cc/min @ 3.0 Bar (43.5 psi)
Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi) – Requires Minimum 11volt.
Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbons. NOT Compatible with Ethers (MTBE, ETBE, TAME) or Nitro Methane
Electrical Connector – USCAR
Fitment by Make & Model
All applications with an asterisk after the part number are incompatible with the stock ECU due to scaling limits.
WARNING: If the vehicle will sit for an extended period of time (2 weeks in drier climates, less in humid climates) exercise one of the following options. These simple measures will protect the internals of ID2000 and ID2600 fuel injectors from potential corrosion induced problems such as seizure and or flow deviation.
- Pickle the fuel system. Drain the alcohol based fuel from the tank and refill with gasoline. Start engine and allow fuel to circulate for at least 2 minutes.
- Lubricate each injectors internals: Uninstall the injectors, liberally spray penetrating oil into the inlet / outlet of each injector. Connect one pin to the positive battery terminal of a 9v – 18v battery and tap the other pin to the ground terminal of the battery 5 times to open and close the valve and allow oil to coat everything else.