Cobb Tuning 2018-2020 Ford F150 Ecoboost Raptor Intake System With HCT
GEN 2 FORD F-150 ECOBOOST RAPTOR INTAKE SYSTEM W/HCT (7F2125)
The COBB Intake w/ HCT for the second generation Ford Raptor checks every box that enthusiasts expect from a high-quality bolt on upgrade. The factory piping from the air-box is replaced with dual 3" mandrel bent aluminum tubing to maximize airflow while custom silicone couplers ensure perfect OEM-like fitment.
This new iteration of our intake utilizes OEM-grade hydrocarbon filter element incorporated into our in-house designed retaining cage that connects to the tubing allowing for factory emissions filtering all while increasing airlfow and performance of the truck.
The injection molded - fiber reinforced airbox lid incorporates a closed-cell foam gasket to seal the filter from mud, dirt, and debris. Powder coated tubing, composite material, OEM-grade HydroCarbon Trap integrated into the tubing, and a COBB nameplate transform the engine bay to look as sharp as the iconic Raptor exterior.
Also, we combined the improved airbox design with a high flow, dual inlet, tapered-oval filter. With 165% more surface area over stock, the intake produces more air-flow and a more audible turbo sound when building boost at low RPM.
- 3" Mandrel Bent Tubing with Wrinkle Black Powder Coating
- Injection Molded Reinforced Composite Airbox Lid
- OEM-grade HydroCarbon Filter Element
- Cell-Foam Gasket Seals Against Mud/Dirt/Debris
- Filter with 165% More Surface Area Versus Stock
This part is legal under the provisions of EPA’s Anti-Tampering Policy. COBB Tuning has established a reasonable basis (testing results) via SEMA Garage Emissions Certification that verifies that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA’s Anti-Tampering Policy.
NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EMISSION CONTROLLED MOTOR VEHICLE.
Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending. Once testing is complete with California, and an EO number is issued, this product will be updated to 50-state legal status.
TOOLS NEEDED FOR INSTALLATION
- 3/8" ratchet
- 3/8" 6" extension
- 3/8" Socket Swivel
- 3/8" 7mm socket
- 3/8" 8mm socket
- 3/8" 10mm socket
- 3/8" 12mm socket
- Phillips head screwdriver
- Flathead screwdriver
- Aibox Lid
- Airbox Gasket
- Air Filter
- Passenger Intake Tube
- Driver Intake Tube
- Driver Intake Tube
- (2) Hydrocarbon Trap assembly
- 3" Silicone Coupler
- 4"-3" Coupler
- (2) 3" Angled Coupler
- Intake Tube Bracket
- (4) m6 x 1.0 x12mm Button Head Bolt (Stainless)
- (6) m6 x 1.0 x 16mm Button Head Bolt (Stainless)
- #64 Clamp
- (2) #52 Clamp
- (5) #48 Clamp
UNLEASH YOUR PERFORMANCE POTENTIAL
Looking to ensure you get the perfect part for your unique application the first time? Full-Race is here to help.
Email us at email@example.com or call us at (602) 437-2101 to find out how we can help you achieve your goals.
Make sure to tag and follow us on Instagram & Facebook to get featured! @fullracemotorsports
2017-2020 Full Race F150 / Raptor EcoBoost 3.5L | Turbo Blankets / Heat Shield
Addictive Desert Designs 2015-2023 Ford F-150 & Raptor Stealth Fighter Chase Rack
Full-Race 2015-2023 Ford Raptor & F150 3.5L EcoBoost Intercooler Kit
COBB Tuning 2017-2020 Ford F-150 Raptor Ecoboost Accessport V3
Deatschwerks 415LPH In-Tank Fuel Pump w/ Install Kit for Ford F-150 2015-2020
RPG Off-Road 2017-2023 Ford Raptor Billet Upper Control Arms
Cobb Tuning 2017-2019 Ford F150 3.5L Ecoboost Accessport V3 w/TCM Flashing
PTP Ford F150 / Raptor EcoBoost 3.5L | Turbo Blankets / Heat Shield
Full-Race High Flow Air Filters
RPG Off-Road 2017-2023 Ford Raptor Lower Control Arms
Addictive Desert Designs 2011-2023 Ford F150 And Raptor Race Series Chase Rack
Cobb Tuning 2017-2023 Ford F150 Raptor Coolant Overflow Cover
For SHOP OWNERs
& KIT BUILDERs
Full-Race Motorsports is the most
trusted name in turbocharging.