Injector Dynamics ID2600 Fuel Injectors
Injector Dynamics ID2600 Fuel Injectors (Injectors Priced Individually)
Injector Dynamics ID2600 Fuel Injectors (Injectors Priced Individually)
Injector Dynamics ID2600-XDS Fuel Injectors
**PLEASE DO NOT PURCHASE SINGLE OR PARTIAL QUANTITY REPLACEMENT INJECTORS FOR AN EXISTING SET, AS THEY WILL NOT BE FLOW MATCHED AND CAN CAUSE DRIVABILITY ISSUES OR DAMAGE YOUR ENGINE. IF YOU THINK AN INJECTOR NEEDS TO BE REPLACED, YOU MUST FIRST FOLLOW THIS CLEANING PROCEDURE THROUGH ID FOR YOUR EXISTING INJECTOR SET, FOUND HERE - HTTP://INJECTORDYNAMICS.COM/ SERVICE/Â **
Injector Dynamics ID2600-XDS Fuel Injector Specifications
Nominal Flow Rate – 2600cc/min @ 3.0 Bar (43.5 psi)
Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi) – Requires Minimum 11volt.
Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbons. NOT Compatible with Ethers (MTBE, ETBE, TAME) or Nitro Methane
Electrical Connector – USCAR
Fitment by Make & Model
All applications with an asterisk after the part number are incompatible with the stock ECU due to scaling limits.
2600.34.14.14 $343.00
2600.34.14.15 $343.00
2600.48.11.14 $345.00
2600.48.11.WRX $345.00
2600.48.11.F20 $345.00
2600.48.14.14 $345.00
2600.48.14.15 $345.00
2600.48.14.R35 $345.00
2600.48.14.14B $345.00
2600.60.14.14 $345.00
2600.60.14.14-O $345.00
2600.60.14.D $345.00
2600.60.14.14B $350.00
2600.60.11.14 $345.00
2600.60.11.14-O $345.00
2600.60.11.D $345.00
WARRANTY INFO:Â The warranty period is 1 year from the date of original purchase, and covers manufacturer defects. In order to have the expected longevity with any aftermarket injector, the customer must use the proper type of fuel and filtration in the fuel system. Failure to do so will decrease longevity, reliability, and fuel flow. Instances where the customer has failed to take the proper measures or ignored warnings about fuel types and maintenance will not be covered under warranty.
WARNING:Â If the vehicle will sit for an extended period of time (2 weeks in drier climates, less in humid climates) exercise one of the following options. These simple measures will protect the internals of ID2000 and ID2600 fuel injectors from potential corrosion induced problems such as seizure and or flow deviation.
- Pickle the fuel system. Drain the alcohol based fuel from the tank and refill with gasoline. Start engine and allow fuel to circulate for at least 2 minutes.
- Lubricate each injectors internals: Uninstall the injectors, liberally spray penetrating oil into the inlet / outlet of each injector. Connect one pin to the positive battery terminal of a 9v – 18v battery and tap the other pin to the ground terminal of the battery 5 times to open and close the valve and allow oil to coat everything else.
SKU
id2600
WEIGHT
1.000000
BRAND
Injector Dynamics
similar products
Full Race 4 Port MAC Boost Control Solenoid
Barb Fittings and Breather Filter for 4 Port Boost Control Solenoid
Precision PTE 58MM Subaru Bolt On Turbo
Injector Dynamics ID1700X Injectors
IHI Performance OEM+ VF48 Subaru EJ25 Turbo Upgrade
4 Port MAC Boost Control Solenoid Mount for EFR Turbochargers
MHI Subaru EJ25 Stage 2 Stock Location Turbo Upgrade
Injector Dynamics ID1300X Injectors
Full-Race T4 Divided 5 Layer Inconel Gasket
Full-Race Vacuum Line Kit
Injector Dynamics ID1050X Injectors
3 Port Boost Control Solenoid (BCS) Fittings and Breather Filter
For SHOP OWNERs
& KIT BUILDERs
Full-Race Motorsports is the most
trusted name in turbocharging.