Cobb Tuning 2015-2023 Ford Mustang Ecoboost Front Mount Intercooler

The COBB EcoBoost Mustang Intercooler Upgrade is the easiest way to drastically improve power when coupled with tuning from the Accessport. Even when stock, the factory FMIC can be overwhelmed with heatsoak. Computer fluid dynamic analysis during the R&D process led to air diverting fins in the end tanks to help utilize the entirety of the larger core. With the COBB FMIC installed, your EcoBoost Mustang will come alive with the new found colder charge air. This upgrade requires no modification to the car for an easy installation that is compatible with the factory MAP sensor.

50 State Legal

This part is legal for sale and use on Emissions Controlled Vehicles in all 50 states when used in accordance with the manufacturer's application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number

• D-660-5
• D-660-29
• D-660-44
• D-660-113
• D-660-140
• D-660-140

It doesn't take long for the factory intercooler on the EcoBoost Mustang to suffer from severe heatsoak. This starts a vicious cycle of escalating intake air temperatures that take away power. The COBB Front Mount Intercooler Upgrade keeps charged air cooler and allows your EcoBoost Mustang to increase and maintain its power potential. Although tuning is not required, significant power gains are only experienced with tuning. The easiest tuning solution exists with the Accessport Stage 2 Off The Shelf maps. For more details on power gains and modification requirements check out the map notes.

FEATURES

• Cast Aluminium Endtanks with COBB Logo
  
• 2.5" Inlet and 3" Outlet
  
• Air Diverting Fins in Endtanks Designed with CFD Analysis
  
• 3" Mandrel Bent Aluminum Piping from Intercooler to Throttle Body
  
• 4-ply 45 Degree 3" Silicone Coupler with COBB Logo

Part List 

• Ford Mustang Ecoboost FMIC Core
  
• 3" Black Powdercoated "Cold Side" Tube
  
• 45 Degree 3" Silicone Hose
  
• 3"- 2.75" Straight Reducer Silicone Coupler
  
• 4 x #48 Hose Clamp
  
• 2 x FMIC Core Mounting Brackets
  
• 2 x Black Mounting Nut Plate
  
• 4 x M6x16mm Hex Bolt
  
• 4 x M8x16mm Hex Bolt
  
• 4 x 6mm Lock Washer
  
• M5x20mm Socket Head Cap Screw (MAP Sensor)
  
• M6x80mm Socket Head Cap Screw (Installation Tool)
  
• COBB FMIC Stencil
  
• COBB License Plate Frame
  
• 2 x COBB 6" White Stickers

Tools Needed

• Flathead Screwdriver
  
• 4mm Allen Wrench
  
• 1/4" or 3/8" Rachet
  
• 1/4" Swivel-Head Ratchet or 1/4" Universal Joint
  
• Various Ratchet Extensions
  
• 5.5mm Socket
  
• 7mm Socket
  
• 8mm Socket
  
• 10mm Socket
  
• 12mm Socket
  
• 10mm Box Wrench
  
• 12mm Box Wrench
  
• T25 Torx Bit
  
• Painter's Tape (If Using Stencil)
  
• Spray Paint of your Choice (If Using Stencil)

Looking to ensure you get the perfect part for your unique application the first time? Full-Race is here to help.

Email us at gofaster@full-race.com or call us at (602) 437-2101 to find out how we can help you achieve your goals.

Make sure to tag and follow us on Instagram & Facebook to get featured! @fullracemotorsports