Experts in Turbocharging since 2003

Build Now, Pay Later

The offer is valid for all orders within the USA. For other countries, the cost will be automatically calculated on checkout.

Free Shipping Over $249

Eligibility: 68 Million in the US. Also allows UK, Canadian and Australian Forces.
Included:
  • - Active Duty (currently serving in the Armed Forces)
  • - Veterans (formerly served in the Armed Forces)
  • - Dependents (spouse or child of above)
Military Discount

Toyota Supra A90 A91 & BMW | CSF G-Series High Performance Heat Exchanger

SKU 8154

The CSF High-Performance Heat Exchanger Helps Unleash the A90/91 Toyota Supra's Full Potential.

NEED HELP? CALL A PRODUCT EXPERT NOW AT 602-437-2101
$699.00
In stock
SKU
8154

The CSF High-Performance Heat Exchanger Helps Unleash the A90/91 Toyota Supra's Full Potential.

The CSF High-Performance Heat Exchanger Helps Unleash the A90/91 Toyota Supra's Full Potential

This heat exchanger is the key to keeping IATs in control for maximum performance. After six months of development and testing with some of the best Supra tuners across the world, CSF is proud to announce its new high-performance all-aluminum charge cooler Front Mount Heat Exchanger upgrade for the A90/91 Toyota Supra (including some BMW G-Series fitment).

CSF G-Series High-Performance Heat Exchanger

CSF’s new High-Performance Heat Exchanger for the A90/91 Supra, BMW Z29 Z4 (and other BMW G-Series models). Complete with transmission oil cooler mounting hardware and rock guard. Since the vehicle was released in 2019, enthusiasts have been looking for performance upgrades to unleash the full potential of the BMW-sourced B58 engine. It didn’t take long for weak points of the vehicle to become chatter across the internet, in Facebook groups, and at race tracks. One of the most apparent problems (and one that was quickly identified by anyone taking the car to a track day): the liquid-cooled charge air cooler system would quickly heat soak with no ability to recover. This would cause the intake air temperatures (IATs) to spike, resulting in the ECU cutting the power output of the vehicle, and eventually putting the car into limp mode.

CSF engineers witnessed the overheating issue first-hand as they were in attendance at the Global Time Attack Finals at Buttonwillow Raceway in November 2019. Several new heavily modified Supra racecars could barely go two or three laps in moderate ambient conditions without having the car go into limp mode, forcing drivers to take a cool-down lap (or two), with some even coming into the pits to have their front mount heat exchangers sprayed down with cold water.

Toyota Supra A90

Even factory-backed teams, such as HKS, were having tremendous overheating issues and would have to periodically come into the pits to spray down through the front grille. Since then, many aftermarket tuning companies have developed bolt-on performance upgrades, software tunes, as well as upgraded hybrid turbos. We have already pushed the limitations of the engine by introducing fully upgraded turbo kits pushing close to 800whp. The increase in horsepower also tremendously increases the heat generated from the engine and gives more reason to balance out those engine bay temps to keep the power consistent with this CSF upgrade heat exchanger.

toyota supra A90

How the Charge Cooling System Works

Because of CSF’s industry-leading reputation and deep knowledge of high-performance BMW cooling systems, its engineers immediately knew what had to be fixed in order to maximize and maintain consistent performance with the B58 engine. The engine is very similar to the S55 in the latest F8X M3/M4 – both feature a liquid-to-air charge cooler mounted on the top of the engine, along with a front mount heat exchanger (water radiator) that first cools the fluid that then cycles through the charge cooler, dissipating heat from the charge air before it enters the engine.

Heat exchanger CSF's technology

The difference is that the B58 liquid-to-air charge cooler is integrated into the intake manifold, rather than being a stand-alone unit that can be easily replaced (like in the F8X S55 variant). Because the charge cooler is built into the manifold, it’s extremely difficult to replace with a high-performance solution, with currently no aftermarket support available. The only solution to keeping intake air temperatures in control on a modified or track-ready Supra is to upgrade with the CSF Front Mount Heat Exchanger.

The report back from our development team with this BMW Z4 was that IATs remained consistently 10-15°F (5.5-8.3°C) lower than with the stock heat exchanger installed, with maximum temperature delta proving a 40°F (22.2°C) reduction between the CSF and OEM cooler. Most importantly, the test Z4 was able to stay on the track longer due to maintained IATs, as well as the CSF Heat Exchanger helping improve airflow to the rest of the cooling system for both lower engine water and engine oil temperatures.

High-Performance Heat Exchanger (CSF#8154) Features

  • Significantly Reduces Intake Air Temperature (IAT) for Maximum Performance (with Faster Heat Soak Recovery)
  • Improves Air Flow to the Rest of the Cooling System for Both Lower Engine Water and Engine Oil Temperatures
  • 2-Row, 42mm Ultra-High-Performance Core
  • 6.5mm Tall Multi-Louvered Fin with CSF’s Exclusive B-Tube Technology
  • CNC Machined Mounting Brackets and OEM Style “Quick Connect” Inlet/Outlet
  • 100% All Aluminum TIG-Welded Construction
  • Includes Rock Guard & Transmission Oil Cooler Mounting Kit (Industry Exclusive)
  • “Drop-in” Fit
  • 2-Year Limited Warranty
  • 1-Hour “Mirror Finish” Hand Polish
  • Tested and Proven by CSF’s Global Network of R&D Partners, Including Leading Time Attack Teams, Tuners, and Turbo Kit Manufacturers
  • Fits:
    • 2020+ Toyota Supra (A90/A91)
    • & 2018+ BMW Models:
      • G29 Z4 20i, 30i & M40i
      • G20 3-Series (320i, 330i, 330iX, M340i, M340iX)
      • G21 3-Series Touring (330i, 330iX, M340iX)
  • OEM#: 16400-WAA03 & 17118666811

CSF high performance heat management

The CSF Advantage – Proven Performance

OEM 25mm 1-Row Core with Crimped Plastic Endtanks vs. CSF 42mm 2-Row Core with CSF’s Exclusive B-Tube Technology (100% TIG-Welded All-Aluminum Design).

CSF's design

OEM rock guard & transmission cooler vs. right: the CSF improved design, including billet transmission cooler mounts, and metal rock guard with improved airflow characteristics. CSF is the only company to include a rock guard and incorporate OEM transmission cooler mounting points for a true plug-and-play “drop-in” fit (minor trimming to OEM plastic transmission cooler mounting is required to accommodate the additional capacity design of the CSF High-Performance Heat Exchanger).

If you have questions about this product or its installation, contact us

SKU

8154

WEIGHT

20.000000

BRAND

CSF

Write A Review

similar products

For SHOP OWNERs
& KIT BUILDERs

Full-Race Motorsports is the most
trusted name in turbocharging.

Wholesale Inquiries
M-F: 8AM-4PM MST