Xona Rotor XR 7164 X3C Turbo SuperCore

$ 1,699.00
SKU
006764
Free Shipping Over $199

Xona XR7164 X3C Supercore

 

The Xona Rotor 7164 Turbo can be compared to a GTX3576R Gen 2, EFR7670, or a Precision 6062 Gen 2

  • 370-750 HP POWER APPLICATIONS
  • 60/82 MM COMPRESSOR WHEEL
  • 71 LB/MIN MASS FLOW
  • 72/64 MM TURBINE WHEEL
  • X2C COMPRESSOR HOUSING – ALSO AVAILABLE WITH X3C COMPRESSOR HOUSING

Xona Rotor XR line of performance turbochargers use innovative solutions to enhance performance and durability. Among them is Xona’s proprietary variable-preload ball bearing cartridge system. Traditional bearing systems with insufficient preload can experience ball sliding and scuffing at high shaft speeds, leading to fretting of the bearing races and short bearing life. The bearing housing itself is a fully-machined, high-strength stainless steel component with an extended water jacket. By fully surrounding the turbine seal ring land area, this advanced cooling feature combats heat soakback, preventing piston ring collapse for enhanced durability at high temperatures. A turbocharger’s bearing system is its heart, and Xona Rotor has left nothing on the table. Xona XR turbochargers use hybrid (ceramic balls and steel races) ball bearing cartridges unlike those found elsewhere. These high-precision ABEC 7 angular contact ball bearings are made with advanced M62 high-speed powder metal steel races, silicon nitride ceramic balls and metallic ball cages. No melted ball cages here. Together these features deliver significantly elevated robustness and durability at extreme temperatures compared to conventional ball bearing systems. Most performance turbochargers today use a single piston ring for sealing the shaft at each end. By contrast, Xona XR turbochargers employ twin rings at both the compressor and turbine ends. This feature dramatically reduces oil leakage and gas intrusion at both ends of the rotating assembly. Furthermore, since the sealing load is spread across two rings, wear rates are reduced and seal life is extended. Complementing this are large-diameter oil slingers incorporated into both ends of the shaft, further reducing splash oil at the piston ring seal location within the bearing cartridge. The compressor register of the CHRA features an overbuilt compressor backplate and cover interface system that is very tolerant of external loads, limiting structural distortion that can lead to compressor wheel rubbing and premature failure. At the oil inlet, XR turbochargers offer a choice of 7/16" inverted flare or straight M12x1.25 connections. Built into the oil inlet cavity of the CHRA is a large volume “last ditch” oil filter element that prevents oil contaminants from entering the bearing system and plugging oil passages within the turbocharger. At the other end of the Xona XR’s bearing housing, a modular oil drain flange allows for a variety of bolt spacing.

 

SPECS
SKU 006764
Sort By Turbos
Product Name Xona Rotor XR 7164 X3C Turbo SuperCore
Weight 20.000000
Brand Xona Rotor
Brands Xona Rotor
Write Your Own Review
Write a ReviewXona Rotor XR 7164 X3C Turbo SuperCore
To Top