Experts in Turbocharging since 2003

Build Now, Pay Later

The offer is valid for all orders within the USA. For other countries, the cost will be automatically calculated on checkout.

Free Shipping Over $249

Eligibility: 68 Million in the US. Also allows UK, Canadian and Australian Forces.
Included:
  • - Active Duty (currently serving in the Armed Forces)
  • - Veterans (formerly served in the Armed Forces)
  • - Dependents (spouse or child of above)
Military Discount
+1 (602) 437-2101 Open M–F 8AM–4PM

Precision PTE GEN2 40mm PW40 Wastegate

SKU PBO085-1510

Precision Turbo and Engine PW40 40mm External Wastegate GEN2

NEED HELP? CALL A PRODUCT EXPERT NOW AT 602-437-2101
$323.56
In stock
SKU
PBO085-1510

Precision Turbo and Engine PW40 40mm External Wastegate GEN2

Precision Turbo and Engine PW40 40mm External Wastegate GEN2

 

Precision Turbo and Engine's high-quality yet economical GEN2 PW40 40mm external wastegate is perfect for the automotive enthusiast looking to get the most from their turbocharged car, truck or any other vehicle.  With over 60 years of combined turbocharger development and racing experience, Precision Turbo takes great pride in providing you with the best external wastegate on the market today. The GEN2 PW40 is made from high grade, high temperature stainless steel and billet aluminum components. It features a purpose-designed Kevlar reinforced wastegate diaphragm and a 347 stainless investment cast valve body. Our investment cast valve body has a smooth internal surface, giving you better flow and more accurate boost control. Our Gen2 PW40 was designed to be a direct replacement for other existing v-band 40mm wastegate flanges. The PW40 features a Nickel Chromium Alloy valve and 5 different 17-7 precipitation hardened springs. Also included are stainless steel inlet and outlet flanges. With a satin black anodized, 6061 aluminum billet wastegate cap you will have years of show quality finish and protection from the elements. The GEN2 PW40 is generally compatible with most aftermarket manual and electronic boost controllers on the market today.

Precision Turbo and Engine GEN2 PW40 External Wastegate Features:

  • V-Band Inlet/Outlet wastegate is constructed from high grade, high temperature stainless steel and billet aluminum components for the best in strength, style and functionality at an affordable price
  • A 347 stainless investment cast valve body to provide consistent performance without fatigue or failure while also allowing for accurate boost control
  • High grade, high temperature stainless steel and billet aluminum components for the best in strength, style and functionality at an affordable price
  • An internal Nickel Chromium Alloy valve
  • 5 different 17-7 precipitation hardened springs for further adjustment of boost levels
  • Standard bolt-style flange configuration for easy mounting
  • A satin black anodized finish with 6061 aluminum billet cap
  • All clamps necessary for installation

GEN2 PW40 External Wastegate Overview:

Your GEN2 PW40 wastegate, controls turbocharger boost by bypassing turbine inlet exhaust gas via a spring loaded valve diaphragm assembly. Spring rate, in conjunction with boost pressure signal, and back pressure, control the opening point of the wastegate valve. Once the spring rate has been overcome by boost pressure, the valve will open. This causes exhaust flow to be diverted away from the turbine side of the turbocharger, effectively slowing and/or stabilizing the turbine wheels’ speed. This stabilization results in a smooth and steady boost pressure level, created by the compressor wheel of the turbocharger. Open pressure of the valve can be controlled via spring rate and or a boost controller, such as a manual boost controller or an electronic boost controller.
 

GEN2 PW40 External Wastegate Installation Instructions:

  • Be sure to install the valve seat into the body of the wastegate before final installation.
  • Tighten the supplied bolts to 85-90 inch /lbs (9.6 – 10.2 Newton meters).
  • In order to assure proper boost control, your PW40 wastegate needs to be mounted at a smooth transitional angle with the exhaust flow. 90° mounting onto exhaust tubing is NOT recommended. Refer to diagrams below.
  • Inlet and Outlet flanges are constructed of, 304 stainless steel and are compatible with most stainless steel and mild steel welding rod material.
  • It is recommended to secure all vacuum and or boost control hoses securely with zip ties or cushioned clamps. Route all vacuum hoses away from high heat sources such as the turbine housing and exhaust manifold.
  • Your PW40 wastegate includes two hose barb banjo assemblies and one pressure port cap. Allowing you to install the lower hose barb banjo assembly in one of two locations, depending on your wastegate mounting position.
  • Allow for cool airflow around the top billet wastegate cover.
  • Use caution when working on a hot engine. Wastegate and turbocharger components are EXTREMELY HOT and can cause severe burns.
  • Wastegate outlet can be routed back into the exhaust system or vented to atmosphere. Note that venting to atmosphere only applies to OFF ROAD VEHICLES. Venting wastegate exhaust to atmosphere may be ILLEGAL and considered to be emissions related tampering under applicable laws, rules and regulations.
  • Note: The optimum mounting and placement of your new PW40 wastegate will be determined by your manifold and turbocharger configuration

GEN2 PW40 External Wastegate Boost Control:

The PTE GEN2 PW40 external wastegate is designed to be a direct fit replacement for other units on the market and is compatible with most aftermarket manual or electronic boost controllers for ease of use.

As an added bonus, all 40mm Precision Turbo PW40 wastegates are warranted to be free from manufacturer's defect for a period of 12 months or 12,000 miles!

 

If a 4 port Boost Control Solenoid is used, this is the recommended plumbing orientation diagram, although there may also be other routing configurations based on your set up.

 

 

SKU

PBO085-1510

WEIGHT

5.000000

BRAND

Precision

Write A Review

For SHOP OWNERs
& KIT BUILDERs

Full-Race Motorsports is the most
trusted name in turbocharging.

Wholesale Inquiries
M-F: 8AM-4PM MST