Experts in Turbocharging since 2003

Build Now, Pay Later

The offer is valid for all orders within the USA. For other countries, the cost will be automatically calculated on checkout.

Free Shipping Over $249

Eligibility: 68 Million in the US. Also allows UK, Canadian and Australian Forces.
Included:
  • - Active Duty (currently serving in the Armed Forces)
  • - Veterans (formerly served in the Armed Forces)
  • - Dependents (spouse or child of above)
Military Discount

Xona Rotor XR6564S X3C SuperCore

SKU 006099

Xona Rotor X3C XR6564S

NEED HELP? CALL A PRODUCT EXPERT NOW AT 602-437-2101
$1,557.05
SKU
006099

Xona Rotor X3C XR6564S

Xona Rotor X3C XR6564S Super Core

  • HTZ compressor wheel: 65 lb/min
  • Compressor inducer: 57.5mm
  • Compressor exducer: 79mm
  • X2C compressor housing
  • Horsepower: 340-680
  • Turbine wheel: 68/64mm
  • Inlet sizes: 3", 84mm Dual ceramic ball bearing Billet stainless steel lightweight bearing housing

X3C Super Core Assemblies by Xona Rotor feature the most robust and durable technologies available for turbochargers today. The heart of a Xona Rotor consists of a stainless steel housing containing a hybrid dual ceramic ball bearing system. Xona uses a proprietary variable angular preload contact bearing technology that provides consistent and sufficient preload, providing long-lasting bearing life. Available in many different sizes and trims, Xona Super Core assemblies are designed and manufactured in the USA for superior quality.

 

Features:

  • Designed and manufactured in the US
  • Hybrid dual ceramic ball bearing with steel race
  • Variableble preload angular bearing system
  • High-strength stainless steel bearing housing
  • Extended water jacket provides water cooling that surrounds the turbine seal ring area
  • Twin ring shaft sealing at compressor and turbine ends for resisting gas intrusion and oil loss
  • An integrated oil filter element
  • Modular oil drain flange for different bolt spacing
  • Includes compressor housing, turbine housing sold separately
  • 65 lb/min. HTZ Compressor Wheel
  • 57.500 mm Inducer / 79 mm Exducer
  • 68/64 mm Turbine Wheel
  • 340-680 HP
  • Dual Ceramic Ball Bearing
  • Lightweight Billet Stainless Steel Bearing Housing
Xona Rotor XR line of performance turbochargers use innovative solutions to enhance performance and durability. Among them is Xona’s proprietary variable-preload ball bearing cartridge system. Traditional bearing systems with insufficient preload can experience ball sliding and scuffing at high shaft speeds, leading to fretting of the bearing races and short bearing life. The bearing housing itself is a fully-machined, high-strength stainless steel component with an extended water jacket. By fully surrounding the turbine seal ring land area, this advanced cooling feature combats heat soakback, preventing piston ring collapse for enhanced durability at high temperatures. A turbocharger’s bearing system is its heart, and Xona Rotor has left nothing on the table. Xona XR turbochargers use hybrid (ceramic balls and steel races) ball bearing cartridges unlike those found elsewhere. These high-precision ABEC 7 angular contact ball bearings are made with advanced M62 high-speed powder metal steel races, silicon nitride ceramic balls and metallic ball cages. No melted ball cages here. Together these features deliver significantly elevated robustness and durability at extreme temperatures compared to conventional ball bearing systems. Most performance turbochargers today use a single piston ring for sealing the shaft at each end. By contrast, Xona XR turbochargers employ twin rings at both the compressor and turbine ends. This feature dramatically reduces oil leakage and gas intrusion at both ends of the rotating assembly. Furthermore, since the sealing load is spread across two rings, wear rates are reduced and seal life is extended. Complementing this are large-diameter oil slingers incorporated into both ends of the shaft, further reducing splash oil at the piston ring seal location within the bearing cartridge. The compressor register of the CHRA features an overbuilt compressor backplate and cover interface system that is very tolerant of external loads, limiting structural distortion that can lead to compressor wheel rubbing and premature failure. At the oil inlet, XR turbochargers offer a choice of 7/16" inverted flare or straight M12x1.25 connections. Built into the oil inlet cavity of the CHRA is a large volume “last ditch” oil filter element that prevents oil contaminants from entering the bearing system and plugging oil passages within the turbocharger. At the other end of the Xona XR’s bearing housing, a modular oil drain flange allows for a variety of bolt spacing.
 

SKU

006099

WEIGHT

20.000000

BRAND

Xona Rotor

Write A Review

For SHOP OWNERs
& KIT BUILDERs

Full-Race Motorsports is the most
trusted name in turbocharging.

Wholesale Inquiries
M-F: 8AM-4PM MST