BorgWarner AirWerks 60mm S360 SX (90-degree)
S360SX3 – 60mm S300SX3 8376 Turbo with 90° Compressor Outlet aka 8376 60mm S300SX3 (177280)
The 60mm S360SX uses an 83.47mm exducer with 60mm inducer compressor. This turbo is essentially the standard S360 but comes standard as a 90° compressor housing outlet with T4 0.88 A/R single scroll open volute turbine housing. It is easily upgradeable to twin scroll T4 with 0.91 or 1.00 A/R.
The Compressor is a seven-bladed 60mm inducer, 83.47mm exducer rated at ~72lb/min (Compressor Map Unavailable). Recommended for use in high flow 450-750whp applications compressor housing is a 4″ inlet, 3″ outlet. Due to the extra flow capacity in this turbine wheel, we recommend using the 0.91 A/R for small displacement 4 cyl engines, and the 1.00 A/R for high boost over 26+psi. Journal Bearing and Oil Cooled only (water cooling and BB CHRA not applicable).
BorgWarner’s S300SX3 60mm Turbo Features
- 4.0″ inlet / 3″ outlet compressor housing
- All-new severe duty 360-degree thrust bearing
- Interchangeable with existing turbine housings
- 76mm turbine wheel
- Compressor Wheel Exducer: 83mm
- Compressor Wheel Inducer: 60mm
- Max Flow Rate: ~72 lbs/min (Compressor Map Unavailable)
- Max Recommended Turbo Speed: 121948 RPM
- Compressor Housing Connections:
- Inlet: 4.0″ Hose Coupler
- Outlet: 3.0″ Hose Coupler
- Turbine Wheel Exducer: 67.56mm
- Turbine Wheel Inducer: 76mm
- Housing Size and A/R ratio: S360SX3 8376 is available in three (3) different turbine housing configurations:
- 0.88 A/R Open Volute T4 Single Scroll Inlet *Included*
- 0.91 A/R Divided T4 Twin Scroll Inlet
- 1.00 A/R Divided T4 Twin Scroll Inlet
- 3/4 Marmon or Optional 3″ V-Band Upgrade ($150)
Airwerks® Series Turbochargers
Simple. Scalable. Strong.
Airwerks turbochargers are designed for the competitive motorsports market as well as drivers retrofitting a naturally aspirated engine or looking for a little more performance from a factory turbocharged car.
Engineered specifically for drag racing, pulling, and road racing, AirWerks turbochargers have earned a reputation as robust, brute-force induction systems. Looking for a no-frills replacement? Want to upgrade your turbocharger? Working with limited space? BorgWarner’s AirWerks turbochargers are the perfect go-to product for many applications.
With a twin hydrodynamic journal bearing design, AirWerks turbochargers feature an effective high-pressure ratio compressor stage, extended-tip technology, and a high-efficiency turbine stage. The configuration provides ultra-fast response and more than 70 PSI of boost.
If you have questions about this product or its installation, contact us.
Universal Installation Parts
2.5" 45 Degree Coupler Extra Long
T3 Turbine Flange Gasket
3" V-Band Flanges
T4 Open Turbine Flange
T4 Divided Turbine Flange
4 Bolt Downpipe Turbine Flange For GT, GTX and T3/T4 Garrett Turbos
Full-Race Billet Medium GT Oil Drain Flange (1/2" NPT)
3.0" 3-Bolt Exhaust Flange for Downpipe and Exhaust Connections
10mm M10 Inconel Turbo Stud Hardware Kit T3 T4 Turbos
4" V-band Flange Kit
Large GT/GTX Oil Drain Flange
Full-Race Billet Vacuum / Boost Reference Manifold Block
2.5" Silicone Hump Hose
Silicone 4" 45 Degree Intake Elbow / Coupler
Full-Race T4 Divided 5 Layer Inconel Gasket
T3 Open Turbine Flange
Full-Race 304 Stainless Steel 3" V-Band Flange Kit
Full-Race 304 Stainless Steel 4" V-band Flanges
For SHOP OWNERs
& KIT BUILDERs
Full-Race Motorsports is the most
trusted name in turbocharging.