Injector Dynamics ID2600 Fuel Injectors

$343.00
SKU
id2600
Injector Dynamics ID2600 Fuel Injectors

Injector Dynamics ID2600-XDS Fuel Injectors

The ID2600-XDS has the highest flow rate of any injector offered by Bosch, and flows 50% more than the ID1700x to support your power goals. These injectors were developed specifically for use with liquid fuels, featuring corrosion resistant internals, and long term compatibility with ethanol and methanol.

Injector Dynamics ID2600-XDS Fuel Injector Specifications

Nominal Flow Rate – 2600cc/min @ 3.0 Bar (43.5 psi)
Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi) – Requires Minimum 11volt.
Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbons. NOT Compatible with Ethers (MTBE, ETBE, TAME) or Nitro Methane
Electrical Connector – USCAR

The ID2600-XDS benefits from Dual Slope Matching, a method of matching the flow rate in both the linear, and nonlinear operating range, providing better cylinder to cylinder consistency at low pulse widths, which basically means they provide the most consistent fueling possible, to help you avoid the possibility of situations like a lean cylinder misfire and detonation, which in boosted applications, can be the cause of catastrophic failure. 
 

Fitment by Make & Model

All applications with an asterisk after the part number are incompatible with the stock ECU due to scaling limits.

 
*Universal ID2600 XDS Fuel Injectors:

2600.34.14.14 $343.00
2600.34.14.15 $343.00
2600.48.11.14 $345.00
2600.48.11.WRX $345.00
2600.48.11.F20 $345.00
2600.48.14.14 $345.00
2600.48.14.15 $345.00
2600.48.14.R35 $345.00
2600.48.14.14B $345.00
2600.60.14.14 $345.00
2600.60.14.14-O $345.00
2600.60.14.D $345.00
2600.60.14.14B $350.00
2600.60.11.14 $345.00
2600.60.11.14-O $345.00
2600.60.11.D $345.00

WARRANTY INFO:  The warranty period is 1 year from the date of original purchase, and covers manufacturer defects. In order to have the expected longevity with any aftermarket injector, the customer must use the proper type of fuel and filtration in the fuel system. Failure to do so will decrease longevity, reliability, and fuel flow. Instances where the customer has failed to take the proper measures or ignored warnings about fuel types and maintenance will not be covered under warranty.

WARNING: If the vehicle will sit for an extended period of time (2 weeks in drier climates, less in humid climates) exercise one of the following options. These simple measures will protect the internals of ID2000 and ID2600 fuel injectors from potential corrosion induced problems such as seizure and or flow deviation.

  1. Pickle the fuel system. Drain the alcohol based fuel from the tank and refill with gasoline. Start engine and allow fuel to circulate for at least 2 minutes.
  2. Lubricate each injectors internals: Uninstall the injectors, liberally spray penetrating oil into the inlet / outlet of each injector. Connect one pin to the positive battery terminal of a 9v – 18v battery and tap the other pin to the ground terminal of the battery 5 times to open and close the valve and allow oil to coat everything else.
More Information
SKUid2600
Product NameInjector Dynamics ID2600 Fuel Injectors
Weight10.000000
BrandInjector Dynamics
BrandsInjector Dynamics
Write Your Own Review
Write a ReviewInjector Dynamics ID2600 Fuel Injectors
To Top