10mm M10 Inconel Turbo Stud Hardware Kit T3 T4 Turbos
Keep Everything Tight With Full-Race's 10mm M10 Inconel Turbo Stud Hardware Kit T3 T4 Turbos
Keep Everything Tight With Full-Race's 10mm M10 Inconel Turbo Stud Hardware Kit T3 T4 Turbos
Keep Everything Tight With Full-Race's 10mm M10 Inconel Turbo Stud Hardware Kit T3 T4 Turbos
Tired of turbos loosening on the manifold? Professional and amateur racing teams agree: Full-Race's M10 turbo hardware is the solution. Designed specifically for high-performance turbocharged applications, this high-quality A286 stud is heat-treated, solution annealed, and precipitation hardened. The nut is silver-plated A4-70 grade, allowing it to be used without anti-seize (keeps long-term service removal possible).
Recommended for use in twin scroll applications with our Inconel MLS T4 gasket. By using 1.5 (standard pitch) on the manifold side and 1.25 (fine pitch) on the turbo side, the standard pitch thread will stay put in the manifold while the fine pitch 1.25 Inconel nut will be easy to remove without dislodging/unthreading the stud from the flange. This works perfectly with your existing turbo manifolds which typically use 3/8-16 hardware (the old industry standard). All you need to do is run a 10mm x 1.5 thread chaser through the 3/8-16 threads.
*Using a tap instead of a thread chaser is very common, but may weaken the threads.*
Features
- 1.5 Thread Pitch Manifold / 1.25 Thread Pitch Turbo Hardware
- Stud torque spec: 38 Nm +/- 3 Nm (28 ft/lbs)
- Nut torque spec: 57 Nm +/- 3 Nm (42 ft/lbs)
Application Notes
- 4 studs/nuts are included in each set.
- 4 matched Heico-Lock anti-vibration washers included
- M10 is for T3 and T4 turbos.
- Stud Overall Length: 40mm
- 1.5 Coarse Thread Length: 13mm
- 1.25 Fine Thread Length: 15.5mm
For T25 Turbos, use our M8 Inconel Stud Hardware Kit.
If you have questions about this product or its installation, contact us.Â
SKU
FR-UNI-TSHK-M10
WEIGHT
0.500000
BRAND
You may also like:
Full-Race T4 Divided 5 Layer Inconel Gasket
T3 Turbine Flange Gasket
Full Race Turbo Blankets For T4 Turbochargers
Full Race 3" EFR V-Band Clamp
Barb Fittings and Breather Filter for 4 Port Boost Control Solenoid
BorgWarner EFR 3" Downpipe V-band Flange
T4 Undivided Turbine Flange Gasket
3 Port MAC Boost Control Solenoid (BCS)
Full Race 4 Port MAC Boost Control Solenoid
Full-Race Billet Vacuum / Boost Reference Manifold Block
similar products
3 Port MAC Boost Control Solenoid (BCS)
Injector Dynamics ID1050X Injectors
CSF 93-98 Toyota Supra Radiator Upgrade
Walbro 450 LPH E85 Compatible Walbro Universal In-Tank Fuel Pump
Precision Turbo 64mm GEN2 PTE 6466 CEA Turbo
Injector Dynamics ID1300X Injectors
Garrett GTX3582R Gen II Turbo
Full Race Turbo Blankets For T3 Turbochargers
Full Race Turbo Blankets For T25 and T28 Turbochargers
Precision Turbo 62mm Gen 2 PTE 6266 CEA Turbo
Full Race 4 Port MAC Boost Control Solenoid
3 Port Boost Control Solenoid (BCS) Fittings and Breather Filter
For SHOP OWNERs
& KIT BUILDERs
Full-Race Motorsports is the most
trusted name in turbocharging.