This kit is designed to make installing a custom turbo setup on your FK8 Civic Type R as quick and easy as possible, with all required fittings and lines needed for a D.I.Y custom turbo setup. There are several hard to find odds and ends included with this kit that make the install a breeze. If you have any questions regarding the installation, we’re here to help, please contact us [email protected] or reference the installation guide.

 

EFR Universal Kit Box

Turbo Kit Box (Hardware)

-Oil Feed Line

___  ___ (1) -4 AN 36” Long Stainless Braided Line (90° One End)

___  ___ (1) -4 AN Male to 1/8” NPT Male Straight Steel Fitting

___  ___ (1) 1/8” NPT Male Run “T” Steel Fitting

___  ___ (1) 1/8” NPT Female to 1/8” BSPT Male Straight Steel Fitting

-Oil Return Line

___  ___ (2) Medium GT Oil Drain “Thin” Flange

___  ___ (2) Medium GT Oil Drain Gasket

___  ___ (2) M8-1.25 x 16 Socket Cap Screws

___  ___ (2) M6-1.0 x 17 Tapered Screw

___  ___ (2) -10 AN Male to ½” NPT Male Straight Steel Fitting

___  ___ (1) -10 AN Female Twist-Lok 45° Hose End

___  ___ (1) -10 AN Female Twist-Lok Straight Hose End

___  ___ (1) 24” Length of 5/8” ID Jiffy Push On Hose Black

___  ___ (2) ½”-29/32” Worm Drive Hose Clamps

-Vacuum Line

___  ___ (1) Brass Barbed Tube Fitting Tee for 1/4″ Hose ID

___  ___ (1) Brass Barbed Tube Fitting Reducing Tee for 3/8″X1/4″X3/8″ Hose ID

___  ___ (1) 72” Length of 1/4” ID Jiffy Push On Hose Black

-Coolant Lines

___  ___ (2) M14-1.5 Male to -6                 AN Male Straight Fittings

___  ___ (2) M14 Crush Washers

___  ___ (2) -6 AN Female Twist-Lok 90° Hose Ends

___  ___ (1) 60” Length of 3/8” ID Jiffy Push On Hose Black

___  ___ (4) ½”-29/32” Worm Drive Hose Clamps

 

Airworks Universal Kit Box

Turbo Kit Box (Hardware)

-Oil Feed Line

___  ___ (1) -4 AN 36” Long Stainless Braided Line (90° One End)

___  ___ (1) Small GT Feed Flange

___  ___ (1) Small GT Feed Gasket

___  ___ (2) M8-1.25 x 16 Socket Cap Screws

___  ___ (1) -4 AN Male to 7/16”-24 Male Straight .059 Restrictor Fitting

___  ___ (1) -4 AN Male to 1/8” NPT Male Straight Fitting

___  ___ (1) 1/8” NPT Male Run “T” Fitting

___  ___ (1) 1/8” NPT Female to 1/8” BSPT Male Straight Fitting

-Oil Return Line

___  ___ (2) Medium GT Oil Drain “Thin” Flange

___  ___ (2) Medium GT Oil Drain Gasket

___  ___ (2) M8-1.25 x 16 Socket Cap Screws

___  ___ (2) M6-1.0 x 17 Tapered Screw

___  ___ (1) -10 AN Male to 3/8” NPT Male Straight Steel Fitting (Block Side)

___  ___ (1) 3/8” NPT Male to 5/8” Barb Male Straight Fitting (Turbo Side)

___  ___ (1) -10 AN Female Twist-Lok 45° Hose End

___  ___ (1) -10 AN Female Twist-Lok Straight Hose End

___  ___ (1) 24” Length of 5/8” ID Jiffy Push On Hose Black

___  ___ (2) ½”-29/32” Worm Drive Hose Clamps

-Coolant Lines

___  ___ (2) M14-1.5 x 1/4” Banjo  Bolts

___  ___ (4) M14 Crush Washers

___  ___ (2) M14 Banjo to ¼” NPT Female Aluminum Fittings

___  ___ (2) 1/4” NPT Male to 5/16” Barb 90° Brass Fittings

___  ___ (1) 60” Length of 5/16” ID Jiffy Push On Hose

___  ___ (4) ½”-29/32” Worm Drive Hose Clamps

 

-Vacuum Line

___  ___ (1) Brass Barbed Tube Fitting Tee for 1/4″ Hose ID

___  ___ (1) Brass Barbed Tube Fitting Reducing Tee for 3/8″X1/4″X3/8″ Hose ID

___  ___ (1) 72” Length of 1/4” ID Jiffy Push On Hose Black

 

Garrett Universal Kit Box

Turbo Kit Box (Hardware)

-Oil Feed Line

___  ___ (1) -4 AN 36” Long Stainless Braided Line (90° One End)

___  ___ (1) Small GT Feed Flange (T3/T4 Journal Bearing Only)

___  ___ (1) Small GT Feed Gasket (T3/T4 Journal Bearing Only)

___  ___ (2) M8-1.25 x 16 Socket Cap Screws (T3/T4 Journal Bearing Only)

___  ___ (1) -4 AN Male to 7/16”-24 Male Straight .059 Restrictor Fitting (T3/T4 & GT Only)

___  ___ (1) -4 AN Male to 1/8” NPT Male Straight Fitting (2 for T3/T4 Journal Bearing)

___  ___ (1) 1/8” NPT Male Run “T” Fitting

___  ___ (1) 1/8” NPT Female to 1/8” BSPT Male Straight Fitting

-Oil Return Line

___  ___ (2) Medium GT Oil Drain “Thin” Flange

___  ___ (2) Medium GT Oil Drain Gasket

___  ___ (2) M8-1.25 x 16 Socket Cap Screws

___  ___ (2) M6-1.0 x 17 Tapered Screw

___  ___ (2) -10 AN Male to 3/8” NPT Male Straight Steel Fitting (GT Only, Only 1 if T3/T4)

___  ___ (1) Large GT Oil Drain Flange (T3/T4 Only)

___  ___ (1) Large GT Oil Drain Gasket (T3/T4 Only)

___  ___ (2) M8-1.25 x 20 Socket Cap Screws (T3/T4 Only)

___  ___ (1) -10 AN Male to ½” NPT Male Straight Steel Fitting (T3/T4 Only)

___  ___ (1) -10 AN Female Twist-Lok 45° Hose End

___  ___ (1) -10 AN Female Twist-Lok Straight Hose End

___  ___ (1) 24” Length of 5/8” ID Jiffy Push On Hose Black

___  ___ (2) ½”-29/32” Worm Drive Hose Clamps

-Coolant Lines (T3/T4 Ball Bearing & GT) Watercooled Only

___  ___ (2) M14-1.5 x 1/4” Banjo  Bolts

___  ___ (4) M14 Crush Washers

___  ___ (2) M14 Banjo to ¼” NPT Female Aluminum Fittings

___  ___ (2) 1/4” NPT Male to 5/16” Barb 90° Brass Fittings

___  ___ (1) 60” Length of 5/16” ID Jiffy Push On Hose

___  ___ (2) ½”-29/32” Worm Drive Hose Clamps

-Vacuum Line

___  ___ (1) Brass Barbed Tube Fitting Tee for 1/4″ Hose ID

___  ___ (1) Brass Barbed Tube Fitting Reducing Tee for 3/8″X1/4″X3/8″ Hose ID

___  ___ (1) 72” Length of 1/4” ID Jiffy Push On Hose Black