Cobb Tuning 2021-2023 Ford F150 Raptor HCT Redline Intake
GEN 3 FORD F-150 ECOBOOST RAPTOR REDLINE CARBON FIBER INTAKE SYSTEM (7F4160)
All of the carbon fiber pieces in this system are constructed of a 3k tow in a 2x2 twill weave pattern with a gloss clear coat. Factory piping from the air-box is replaced with 3" tubing to maximize airflow and coupled with high quality HydroCarbon filter element incorporated into the airflow path of the tubes. A bespoke carbon airbox lid replaces the factory piece and allows installation of our reusable dual-inlet, high flow filter offering 165% additional surface area over stock. Black 4-ply silicone couplers are held in place with black e-coated stainless steel clamps, offering a sleek look and OEM-quality installation.
- 3k Row 2x2 Twill Carbon Fiber Construction
- Gloss Clear Coat Finish
- Dual Inlet Filter with 165% More Surface Area Versus Stock
- OEM-grade HydroCarbon Filter Element
- Black Phosphate Coated 304 Stainless Steel Hardware
This part is legal under the provisions of EPA’s Anti-Tampering Policy. COBB Tuning has established a reasonable basis (testing results) via SEMA Garage Emissions Certification that verifies that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA’s Anti-Tampering Policy.
NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EMISSION CONTROLLED MOTOR VEHICLE.
Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending. Once testing is complete with California, and an EO number is issued, this product will be updated to 50-state legal status.
Tools Needed For Installation
- 3/8" ratchet
- 3/8" 6" extension
- 3/8" Socket Swivel
- 3/8" 7mm socket
- 3/8" 8mm socket
- 3/8" 10mm socket
- 3/8" 12mm socket
- Phillips head screwdriver
- Flathead screwdriver
- Aibox Lid
- Airbox Gasket
- Air Filter
- Passenger Intake Tube
- Driver Intake Tube
- Driver Intake Tube
- (2) Hydrocarbon Trap assembly
- 3" Silicone Coupler
- 4"-3" Coupler
- (2) 3" Angled Coupler
- Intake Tube Bracket
- (4) m6 x 1.0 x12mm Button Head Bolt (Stainless)
- (6) m6 x 1.0 x 16mm Button Head Bolt (Stainless)
- #64 Clamp
- (2) #52 Clamp
- (5) #48 Clamp
UNLEASH YOUR PERFORMANCE POTENTIAL
Looking to ensure you get the perfect part for your unique application the first time? Full-Race is here to help.
Email us at firstname.lastname@example.org or call us at (602) 437-2101 to find out how we can help you achieve your goals.
Make sure to tag and follow us on Instagram & Facebook to get featured! @fullracemotorsports
For SHOP OWNERs
& KIT BUILDERs
Full-Race Motorsports is the most
trusted name in turbocharging.