Cobb Tuning 2021-2023 Ford F150 Raptor HCT Intake
GEN 3 FORD F-150 ECOBOOST RAPTOR INTAKE SYSTEM W/HCT (7F2150)
The COBB Intake for the third generation Ford Raptor checks every box that enthusiasts expect from a high-quality bolt on upgrade. The factory piping from the air-box is replaced with dual 3" mandrel bent aluminum tubing to maximize airflow while custom silicone couplers ensure perfect OEM-like fitment.The injection molded - fiber reinforced airbox lid incorporates a closed-cell foam gasket to seal the filter from mud, dirt, and debris. Powder coated tubing, composite material, and a COBB nameplate transform the engine bay to look as sharp as the iconic Raptor exterior.
This new iteration of our intake utilizes OEM-grade hydrocarbon filter element incorporated into our in-house designed retaining cage that connects to the tubing allowing for factory emissions filtering all while increasing airlfow and performance of the truck.
Also, we combined the improved airbox design with a high flow, dual inlet, tapered-oval filter. With 165% more surface area over stock, the intake produces more air-flow and a more audible turbo sound when building boost at low RPM.
- 3" Mandrel Bent Tubing with Wrinkle Black Powder Coating
- Injection Molded Reinforced Composite Airbox Lid
- OEM-grade HydroCarbon Filter Element
- Cell-Foam Gasket Seals Against Mud/Dirt/Debris
- Filter with 165% More Surface Area Versus Stock
This part is legal under the provisions of EPA’s Anti-Tampering Policy. COBB Tuning has established a reasonable basis (testing results) via SEMA Garage Emissions Certification that verifies that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA’s Anti-Tampering Policy.
NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EMISSION CONTROLLED MOTOR VEHICLE.
Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending. Once testing is complete with California, and an EO number is issued, this product will be updated to 50-state legal status.
TOOLS NEEDED FOR INSTALLATION
- 3/8" ratchet
- 3/8" 6" extension
- 3/8" Socket Swivel
- 3/8" 7mm socket
- 3/8" 8mm socket
- 3/8" 10mm socket
- 3/8" 12mm socket
- Phillips head screwdriver
- Flathead screwdriver
- Aibox Lid
- Airbox Gasket
- Air Filter
- Passenger Intake Tube
- Driver Intake Tube
- Driver Intake Tube
- (2) Hydrocarbon Trap assembly
- 3" Silicone Coupler
- 4"-3" Coupler
- (2) 3" Angled Coupler
- Intake Tube Bracket
- (4) m6 x 1.0 x12mm Button Head Bolt (Stainless)
- (6) m6 x 1.0 x 16mm Button Head Bolt (Stainless)
- #64 Clamp
- (2) #52 Clamp
- (5) #48 Clamp
UNLEASH YOUR PERFORMANCE POTENTIAL
Looking to ensure you get the perfect part for your unique application the first time? Full-Race is here to help.
Email us at email@example.com or call us at (602) 437-2101 to find out how we can help you achieve your goals.
Make sure to tag and follow us on Instagram & Facebook to get featured! @fullracemotorsports
For SHOP OWNERs
& KIT BUILDERs
Full-Race Motorsports is the most
trusted name in turbocharging.