BorgWarner EFR 9274 Turbo

$2,068.56
SKU
EFR-9274

BorgWarner EFR 9274 Turbo

BorgWarner EFR 9274 Turbo

EFR9274 is intended for applications which will push a turbo to the limit with high boost and critically high turbo shaft speed. Representing the next evolution of the wildly popular EFR9174, the EFR9274 is the highest flowing 74mm turbine EFR turbo. Recommended for competitive drift and time attack applications, especially at altitude.  This unique turbo was designed specifically by BW engineering to combine the high flowing 91mm compressor exducer with 72mm compressor inducer to allow the same footprint to breathe a LOT better up top. RPM Capabilities have also been improved with higher pressure ratios acheived at lower turbo shaft speed.  Using the same 74mm Gamma-Ti turbine wheel from the EFR9174, this turbo flows an impressive 106lbs/min of air at 125k RPM maximum shaft speed.

Compressor Specifications

    • Compressor Type: Forged-Milled Wheel (FMW) Extended Tip
    • Compressor Wheel OD (exducer): 91mm
    • Compressor Wheel Inducer: 72mm
    • Max Flow Rate: 106 lb/min
    • Built-in BOV: All EFR compressor housings incorporate an integrated compressor recirculation valve
    • Compressor Inlet: 4″ Ported Shroud Hose Coupler
    • Compressor Outlet: 2.5″ Hose Coupler w/ integrated Vband option

Turbine Specifications

      • Turbine Type: Low Inertia Gamma-Ti Turbine Wheel
      • Turbine Wheel OD: 74mm
      • Stainless Steel Turbine Housing
      • Turbine outlet: GT V-Band (aka 3″ V-Band) ~92mm OD for all EFR turbos
comparison of 72mm EFR9274 to 67mm EFR8474
EFR9274 (blue) vs EFR9174 (black) compressor map comparison

Using Borg Warner’s 72mm inducer billet compressor wheel, the 9274 houses the 7 blade extended-tip EFR compressor wheel design with an aggressive trim, capable of 106 lb/min airflow rate. Ceramic Ball Bearing only. We strongly recommend using an EFR Speed Sensor if you plan to run to the limit.

Features

  • Dual Row Ceramic Ball Bearings – lowest friction and fastest spool/response, most extreme durability, built-in 2mm oil restrictor
  • Watercooled Center Section – watercooling is recommended, 14mm banjo bolts
  • Double seals on both turbine and compressor end for extreme durability and resistance to any oil seepage
  • Boost Control Solenoid Valve Integrated to Compressor Housing
  • Integrated Speed Sensor mounting provisions
  • Optional Turbo Speed Sensor Kit
  • Optional Turbo Speed Gauge
  • The EFR 9274 is available in (4) different turbine housing configurations:
    • 0.83 A/R T3 Undivided (Internal WG) #12741008000
    • 0.92 A/R T4 Twin Scroll (Internal WG) #12741008001
    • 1.05 A/R T4 Twin Scroll (External WG) #12741019002
    • 1.45 A/R T4 Twin Scroll (External WG) #12741008003

Aluminum CHRA Clamp Kit Guide

More Information
SKUEFR-9274
Sort ByTurbos
Product NameBorgWarner EFR 9274 Turbo
Weight30.000000
BrandBorgwarner
BrandsBorgWarner
Write Your Own Review
Write a ReviewBorgWarner EFR 9274 Turbo
To Top