Injector Dynamics ID1700X Injectors
Injector Dynamics ID1700X Injectors (Injectors Priced Individually)
Injector Dynamics ID1700X Injectors (Injectors Priced Individually)
Injector Dynamics ID1700X Injector
**Please do NOT purchase single or partial quantity replacement injectors for an existing set, as they will not be flow matched and can cause driveability issues or damage your engine. If you think an injector needs to be replaced, you must first follow this cleaning procedure through ID for your existing injector set, found here - https://injectordynamics.com/
The ID1700x was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extremely high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process.
The ID1700x will deliver flawless stoichiometric idle and cruise mixtures on E85, but like the ID2000, should not be expected to do so on gasoline.
Specifications
Nominal Flow Rate – 1725cc/min @ 3.0 Bar (43.5 psi) Using Iso-Octane at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels.
Electrical Connector – USCAR
SKU
ID1700
WEIGHT
3.000000
BRAND
Injector Dynamics
Universal Installation Parts

10mm M10 Inconel Turbo Stud Hardware Kit T3 T4 Turbos

Full-Race T4 Divided 5 Layer Inconel Gasket

Full-Race Billet Vacuum / Boost Reference Manifold Block

3.0"Â 3-Bolt Exhaust Flange for Downpipe and Exhaust Connections

T4 Divided Turbine Flange

4" V-band Flange Kit

4 Bolt Downpipe Turbine Flange For GT, GTX and T3/T4 Garrett Turbos

T3 T4 Oil Feed Flange

2.5" 45 Degree Coupler Extra Long

T3 Open Turbine Flange

Full-Race 304 Stainless Steel 4" V-band Flanges

3" V-Band Flanges

T4 Open Turbine Flange

Full-Race Billet Medium GT Oil Drain Flange (1/2" NPT)

Large GT/GTX Oil Drain Flange

Full-Race 304 Stainless Steel 3" V-Band Flange Kit

T3 Turbine Flange Gasket

2.5" Silicone Hump Hose
similar products

Injector Dynamics ID2600 Fuel Injectors

Barb Fittings and Breather Filter for 4 Port Boost Control Solenoid

Gold Heat Reflecting Film Self Adhesive 12" X 24"

Full-Race Billet Vacuum / Boost Reference Manifold Block

3 Port MAC Boost Control Solenoid (BCS)

Injector Dynamics ID1050X Injectors

Full Race 4 Port MAC Boost Control Solenoid

Injector Dynamics ID1300X Injectors

Hasport Honda Civic Si 9th gen 2012-2015 K24Z7 Rear Engine Mount

Torque Solution Exhaust Mount Kit for 9th Gen Honda Civic 2012-2015 (Including Si)

2012-2015 9th Gen Honda Civic | Traction Balls

3 Port Boost Control Solenoid (BCS) Fittings and Breather Filter
For SHOP OWNERs
& KIT BUILDERs
Full-Race Motorsports is the most
trusted name in turbocharging.