Full Race 4 Port MAC Boost Control Solenoid
Our 4-port boost control solenoid valve is designed to target a clearly defined boost curve and improve boost responses, and in some cases with a soft WG spring—quicker spool.
Our 4-port boost control solenoid valve is designed to target a clearly defined boost curve and improve boost responses, and in some cases with a soft WG spring—quicker spool.
Full-Race 4 Port MAC Boost Control Solenoid
Our 4-port MAC boost control solenoid valve is designed to target a clearly defined boost curve and improve boost responses, and in some cases with a soft WG spring—quicker spool. The 4-port design works equally well in low boost and high boost applications. The 4 port MAC differs from a traditional 3 port MAC BCSV (boost control soleniod valve) because it precisely directs pressure to the open and close ports of your wastegate diaphragm. This allows for a much lower wastegate spring pressure for better low gear boost control and perfect high gear, high boost control. Low gear boost means more traction at launch and lower gears and higher boost at higher gears when traction is usally less of an issue. This is commonly refered to as "boost by gear"
- MAC Part number – 46A-AA1-JDBA-1BA
Features
- Better spool-up time and mid-range power
- Better duty cycle control to hit target boost and hold
- The solenoid is normally closed so that on failure you will run off the waste-gate spring only – to prevent over-boosting.
- 1/8th NPT fittings
Compatibility
- Ideal for use in sealed Dual Port Internal WG applications, Internal or External
- Hondata S300, K-Pro or Flashpro
- Cobb Tuning AccessPort
- All PWM modulated standalone and piggyback ECUs will support this 4 port BCSV!
Note: 4 Port MAC Boost Control Solenoid must be mounted upside down on B2 EFR frames. This allows the exhaust port to point towards the wastegate nipple. Use our mounting bracket.
Optional Upgrades
- Full-Race Vacuum/Boost Block
- BorgWarner EFR Wastegate Hose Kit
- Fittings and Filter for 4 Port Boost Control Solenoid
Note: If you are upgrading from a 3 port solenoid, the boost control tables will need re-tuning. 4port solenoids require small duty changes, so dial down the PID tables (single-digit numbers) so it is not over-reactive.
If you have questions about this product or its installation, contact us.
SKU
FR-UNI-4PORT-BCSV
WEIGHT
1.000000
BRAND
Full Race
You may also like:
Barb Fittings and Breather Filter for 4 Port Boost Control Solenoid
4 Port MAC Boost Control Solenoid Mount for EFR Turbochargers
Turbosmart 3m Pack -3mm Vacuum Hose
Gasket, "T31" 4 Bolt Turbine Discharge Downpipe Gasket 2.5" 4 bolt
10mm M10 Inconel Turbo Stud Hardware Kit T3 T4 Turbos
Precision PTE GEN2 40mm PW40 Wastegate
Turbosmart IWG75 BorgWarner EFR Internal Wastegate Actuator
PTP BorgWarner EFR Turbo Blanket
48mm Precision PTE 4831 Turbo
Turbosmart GenV IWG Actuator Without Sensor Cap For BorgWarner EFR Turbochargers
similar products
Full-Race Universal Radiator Cap 1.4 Bar / 20psi
3 Port MAC Boost Control Solenoid (BCS)
Barb Fittings and Breather Filter for 4 Port Boost Control Solenoid
Full-Race High Flow Air Filters
Turbosmart EFR Compressor Housing BOV Block Off Plate
10mm M10 Inconel Turbo Stud Hardware Kit T3 T4 Turbos
Ford EcoBoost 2.3 2.0 MZR Balance Shaft Delete Plug
4 Port MAC Boost Control Solenoid Mount for EFR Turbochargers
Full-Race Billet Vacuum / Boost Reference Manifold Block
Turbosmart Mazdaspeed Dual Port BOV
Turbo Speed Sensor Kit
Full-Race Vacuum Line Kit
For SHOP OWNERs
& KIT BUILDERs
Full-Race Motorsports is the most
trusted name in turbocharging.