Hondata Map Sensors (4 Bar or 7 Bar Options)
Hondata Map Sensors (4 Bar or 7 Bar Options)
Hondata Map Sensors (4 Bar or 7 Bar Options)
Hondata Map Sensors (4 Bar or 7 Bar Options)
The Hondata MAP sensor is a plug-compatible replacement for the Honda and Acura factory MAP sensor. It is a direct replacement for the B, D, H, F, J, and K-series Honda engines. This plug-in sensor takes less than 60 seconds to install and eliminates the risk of sensor damage that often occurs when attempting to wire in other types of MAP sensors.Â
It's also worth noting that the 1.5 Turbo Civic Si requires two of these sensors.
Applications
- 4 Bar Map (B, D, H, F-Series and 00-05 S2000)
- 4 Bar Map (2006+ S2000, R18, 2012 Civic Si, ILX, TSX, CRZ) (The 1.5 Turbo Civic Si requires two of these sensors.)
- 4 Bar Map (K-series & 07/08 Fit)
- 7 Bar Map (B, D, H, F-Series and 00-05 S2000)
- 7 Bar Map (K-series 02-06 RSX, 06-11 Civic Si, 04-08 TSX, 07-08 Fit, 04-08 TL, 03-07 Accord & 07/08 Fit)
Important Note for Automatic Transmissions
Automatic transmission computers for the 2009-2010 TSX, 2006-2011 R18 Civic, any CVT CRZ, and Asian RRH-based Civics share the MAP signal with the fuel injection computer. If you have an automatic transmission and change the MAP sensor, then the AT computer will not work correctly. You must retain the stock MAP sensor with ATs.
If you have questions about the product or its installation, contact us.Â
SKU
4Bar
WEIGHT
1.000000
BRAND
Hondata
Universal Installation Parts

Full-Race 304 Stainless Steel 4" V-band Flanges

T3 T4 Oil Feed Flange

Full-Race Billet Vacuum / Boost Reference Manifold Block

4 Bolt Downpipe Turbine Flange For GT, GTX and T3/T4 Garrett Turbos

3.0"Â 3-Bolt Exhaust Flange for Downpipe and Exhaust Connections

Full-Race 304 Stainless Steel 3" V-Band Flange Kit

2.5" Silicone Hump Hose

Silicone 4" 45 Degree Intake Elbow / Coupler

3" V-Band Flanges

Full-Race T4 Divided 5 Layer Inconel Gasket

2.5" 45 Degree Coupler Extra Long

Large GT/GTX Oil Drain Flange

T4 Divided Turbine Flange

T4 Open Turbine Flange

T3 Turbine Flange Gasket

10mm M10 Inconel Turbo Stud Hardware Kit T3 T4 Turbos

Full-Race Billet Medium GT Oil Drain Flange (1/2" NPT)

4" V-band Flange Kit
similar products

Barb Fittings and Breather Filter for 4 Port Boost Control Solenoid

TiAL MVS 38mm External Wastegate

304L Stainless Steel Fuel Sump Kit

10mm M10 Inconel Turbo Stud Hardware Kit T3 T4 Turbos

Gold Heat Reflecting Film Self Adhesive 12" X 24"

BorgWarner EFR 7670 Turbo

Injector Dynamics ID1300X Injectors

BorgWarner Airwerks S257SX-E - 57mm Enhanced S200SX-E 7670 Turbo

Hasport K-series Engine Lean Mount Kit

Walbro 255LPH E85 compatible High Pressure Fuel Pump

Injector Dynamics ID1700X Injectors

Injector Dynamics ID1050X Injectors
For SHOP OWNERs
& KIT BUILDERs
Full-Race Motorsports is the most
trusted name in turbocharging.