Experts in Turbocharging since 2003

Build Now, Pay Later

The offer is valid for all orders within the USA. For other countries, the cost will be automatically calculated on checkout.

Free Shipping Over $249

Eligibility: 68 Million in the US. Also allows UK, Canadian and Australian Forces.
Included:
  • - Active Duty (currently serving in the Armed Forces)
  • - Veterans (formerly served in the Armed Forces)
  • - Dependents (spouse or child of above)
Military Discount

Full-Race Formline Complete Power Pack for 2017-2020 Ford Raptor & F-150 3.5L Ecoboost

SKU A0132A
Achieve a hassle-free turbo upgrade with the Formline Complete Power Pack. Featuring Formline Cast Stainless Exhaust Manifolds, our Turbo Experts thought of everything to take your truck from bone stock to full bolt-ons - without compromising reliability.
NEED HELP? CALL A PRODUCT EXPERT NOW AT 602-437-2101
$7,447.99
SKU
A0132A
Achieve a hassle-free turbo upgrade with the Formline Complete Power Pack. Featuring Formline Cast Stainless Exhaust Manifolds, our Turbo Experts thought of everything to take your truck from bone stock to full bolt-ons - without compromising reliability.

TAKE YOUR TRUCK TO THE NEXT LEVEL

Full-Race Garrett PowerMax Turbo Kit Full-Race Garrett PowerMax Turbo Kit

So you just bought a new-to-you 2017+ F-150 and are looking to turn it into a beast? This Full-Race Complete Power Package will take your truck from bone stock to full bolt-ons. Our Turbo Experts have thought of everything to ensure a complete and trouble-free installation.

Full-Race Complete Power Package

  • Garrett PowerMax Stage 2 Twin Turbos
  • Full-Race Formline Stainless Exhaust Manifolds
  • Full-Race Turbo Install Kit with Full-Race Billet Turbo Adapters
  • Full-Race Ford F-150 Ecoboost 3.5L Inconel Exhaust Manifold Hardware Kit & Gasket Kit
  • Full-Race Cooling Package
  • Full-Race Upgraded Front Mount Intercooler Kit with Aluminum Charge Piping
  • Full-Race Aluminum Radiator
  • NGK Ruthenium Spark Plugs
  • AMS 2017-2020 Raptor & f150 3.5L Ecoboost Turbo Inlet Tubes

Comeplete Power Pack Key Points 

FULL-RACE GARRETT POWERMAX STAGE 2 TURBOS

Compatible with stock or custom tuning, these turbos can be utilized with all stock components in an OE replacement setup. For maximum results, a custom tune and supporting modifications are recommended. Wastegate actuators are pre-calibrated for easy installation. We recommend custom tuning. 

FULL-RACE FRONT MOUNT INTERCOOLER UPGRADE

Heat is the enemy of horsepower. The OEM charge air cooler on the 2017+ F-150s is woefully inadequate, even at stock boost levels. One quick pull can result in charge air temps well above the recommended levels. When your truck’s computer sees this it starts reducing power to save the engine. We like to keep all the power we can. Our Upgraded Intercooler Kit features a high quality, 3.5” thick bar and plate core, along with specially designed end tanks to direct flow through the core. The kits also include upgraded aluminum charge piping and all couplers and clamps for easy installation.

AMS 2017-2020 RAPTOR & F150 3.5L ECOBOOST TURBO INLET TUBES

AMS took one look at the almost 20 HP increase in their product testing and knew they had a game changing product for 2017-2020 F150 owners. AMS’ Engineers designed this one of a kind product to have a 222% increase in the cross sectional area at the power robbing bottleneck near the turbo inlets. This allows the turbos to breathe easier giving them the opportunity to create more power. Their engineers accomplished all of this while still retaining all of the OEM fittings. There are a lot of airbox options on the market so they took extra measures to make sure our turbo inlet tubes work with your aftermarket OEM style intakes. AMS’ turbo inlet tubes feature an understated appearance that results in an OEM look and feel in your trucks engine bay. 

FULL-RACE FORMLINE 3.5L GEN2 RAPTOR & F-150 TURBO MANIFOLDS

The Full-Race Formline Cast Stainless Exhaust Manifolds for the Gen 2 (2017-2020) Ford Ecoboost 3.5L engines are a direct replacement for the OEM cast iron exhaust manifolds. Due to some inherent flaws, the oem cast iron manifolds are known to warp or crack, resulting in costly repairs. Besides that, the oem cast iron manifolds don't flow very well and present fitment challenges when used with larger turbos. The full-race formline cast stainless manifolds solve these issues. Cast from 347 stainless steel, the formline manifolds resist warping and cracking . These manifolds are a 100% bolt-on replacement - including new OEM gaskets, studs and nuts.

FULL-RACE 2011-2020 F150 3.5L ECOBOOST BILLET TURBO ADAPTER KIT

When garrett began development on the powermax stage 2 upgrade turbos, it became clear the stock adaptors are wayy too small - and even aftermarket adapters like spd still would bottleneck the turbine wheel. Full-race developed these to be the largest diameter and highest flowing turbo adapter for the ecoboost engines. They have over 20% more flow than competitor products.

RADIATOR UPGRADE

It's no secret that turbocharged engines generate heat - and the Gen2 EcoBoost 3.5L Raptor and 5.0L V8 F-150 powerplants are no exception.  Whether towing a toy hauler or off-roading, this radiator upgrade is the best solution to keeping temps in check. A direct plug-and-play installation for the F-150 and Gen2 Raptor.  Proven to reduce engine coolant temp (ECT), this radiator is overbuilt to withstand the most demanding conditions.  

Full-Race Ford F-150 Ecoboost 3.5L Inconel Exhaust Manifold Hardware Kit

At Full-Race we know Ecoboost performance. The first step to ensuring that your truck makes all of the boost it's supposed to is to avoid the common exhaust leaks for on the 3.5L manifolds.
Over time the OEM manifolds and hardware suffer from corrosion. In addition to this, the high heat these manifolds are exposed to from the exhaust gasses cause the OEM hardware to weaken and loosen, leading to costly repairs. With the introduction of our Formline Cast Stainless Manifolds, we solved many of these issues, but we wanted to solve them all. That's why we've developed the Full-Race Inconel Stud Kit.

Constructed of A286 Inconel Alloy originally developed for jet engines, these non-magnetic, high nickel studs offer superior temperature and corrosion resistance. Each kit includes 16 studs and nuts to ensure your Ecoboost 3.5L manifolds are free from leaks.

As an added bonus all new Formline Manifolds and turbo kits will include these studs.

THE LATEST INNOVATION IN PRECIOUS METAL SPARK PLUGS

Modern engines demand more power while using less fuel, shortening the life of traditional iridium and platinum spark plugs. NGK’s patented ruthenium technology stands up better to wear to bring maximum durability and performance to your engine.

 

CERAMIC COATING (OPTIONAL)

Looking for a way to protect your turbo or exhaust manifold and improve its efficiency at the same time? Our in-house ceramic exhaust coating does both! Available in black or silver, these 2000+ degree ceramic coatings look great and provide an extra layer of protection against corrosion. By coating the exterior surfaces of your turbo hot side or manifold you retain the heat and energy in the exhaust, not in your engine bay. Improving under-hood temps and increasing efficiency with improved turbo spool are great reasons to add these coatings. Please note that ceramic coating is completed in-house and will add an additional lead time of 1-2 weeks to your order.

 

GooseTuned Testimony

"A lot of you guys ask how these trucks hold up with tuning being high mileage. Not only has he been running my stage 2 tune for thousands of miles, he wanted some more jam, so that’s what was delivered."

Fuel: 91oct + E70

Mods:

  • Full-Race Formline Manifolds
  • Full-Race Billet turbo adapters
  • Garrett PowerMax Turbos
  • Intercooler Upgrade
  • Injector Dynamics 1050cc injectors
  • COBB Accessport (for custom tuning)
  • AMS Catted Downpipes
  • AMS Inlet (boost) tubes & inlet couplers

91oct - 508whp 537wtq

E70 - 669whp 619wtq

"Let me know if you guys have any questions! I’ve tuned 100+ of these setups and they all
Jam with these supporting mods and our custom tuning!"

 

UNLEASH YOUR PERFORMANCE POTENTIAL 

Looking to ensure you get the perfect turbo for your unique application the first time? Full-Race is here to help. Our customized turbo matching and system integration services use accurate operating parameter plotting to eliminate guesswork and trial and error. As turbocharging continues to grow globally, our unwavering commitment to high standards ensures unrivaled quality, reliability, and performance. Email us at gofaster@full-race.com or call us at (602) 437-2101 to find out how we can help you achieve your goals.

Make sure to tag and follow us on Instagram & Facebook to get featured! @fullracemotorsports

Full-Race Logo Full-Race Logo

SKU

A0132A

WEIGHT

164.000000

BRAND

Full Race

Write A Review

similar products

For SHOP OWNERs
& KIT BUILDERs

Full-Race Motorsports is the most
trusted name in turbocharging.

Wholesale Inquiries
M-F: 8AM-4PM MST