2017+ Gen2 F150 Raptor 3.5L EcoBoost Intercooler Kit


2017+ F-150 3.5L Gen2 Raptor EcoBoost Intercooler

Full-Race Ford Raptor Intercooler Kit

F150 Intercooler Full Race


Our V2 Intercooler is the strongest and highest flowing intercooler ever developed for the Gen2 Raptor and F-150 EcoBoost. Featuring aerodynamic cast end tanks with internal flow dividers supporting a 1000cfm flow rate (70% more internal flow area than stock), and <1psi pressure drop at 700+hp airflow levels. The stock EcoBoost intercooler location is less than ideal for cooling, but it also doesn't help if you're planning to install a winch, steel bumper, or run a snowplow, while our Intercooler allows for installation of all the above. Each and every unit is leak tested to 50psi (even small pinhole leaks can cause loss of power.)


  • 2017+ Ford Raptor Ecoboost
  • May fit other applications with slight modifications

F-150 is a tough truck that will be subjected to work site and off-road abuse, high strength and durability are critical. Whether upgrading for increased performance or adding a winch / prerunner bumper - Intercooler upgrades are the recommended first modification for turbocharged EcoBoost engines.  Also known as the CAC (charge air cooler), the stock F-150 CAC is located below the radiator in the lower front grille area. The OEM EcoBoost intercooler uses a thin aluminum core crimped to plastic end tanks, allowing 'heatsoak' (intake air temperatures rise uncontrollably) and a corresponding reduction in power.  The stock intercooler can not fit a winch or aftermarket bumper and it can't handle increased airflow from larger turbos or a tuned F-150 with stock turbos. In comparison, we use an aerospace quality intercooler core and our end tanks are expertly TIG welded in precise fixtures. The lower support beam is hand-fabricated from high strength steel then powder coated black. Using 3" inlet / 3" outlet, the coldside charge pipe is available with water/meth bungs as requested.  Click Here for Independent Test results

Ford F-150 EcoBoost Front Mount Intercooler Kit Features:

  • High-efficiency core designed specifically for the 2.7L, 3.5L and Gen2 Raptor V6 EcoBoost engine
  • CFD optimized high strength cast end tanks using ANSYS software
  • Optional aluminum bungs on charge pipe to suit Water/Meth injection nozzles
  • Retains OEM sensors and purge solenoid fittings - no tuning required
  • Optional Black Coating available for stealth appearance
  • Allows EcoBoost F-150's to use a off-road pre runner bumper 
  • Allows fitment of approved snowplow mounts and other accessories, WARN Winch Compatible using Swarfworks Bracket

Full-Race's Ford F-150 EcoBoost Intercooler / CAC Upgrade Kit Includes:

  • Front Mount Intercooler core with >1000cfm flow rate (70% more internal flow area than stock), using oversized 10mm charge air and 10mm ambient air paths (larger than the stock 6.5mm size) for <1psi pressure drop at 600+hp airflow levels.  17.8L internal volume
  • Intercooler Lower Mounting Beam
  • Intercooler Upper Mounting Bracket
  • Aluminum Charge Piping (Hot and Cold Side)
  • Couplers and Clamps
  • Horn Relocation Bracket
  • Adaptive Cruise Control Relocation Bracket
  • Optional Black Coating

Click HERE for 2017+ Raptor and 2015+ F-150 Intercooler Installation Guide

Customer Testimonials:

"The cooler intake air temperatures have resulted in significant power gains on the dyno." - Tom S.

"The Full-Race Intercooler WORKS. The data showed a drop from 190F IAT2 to almost ambient on a 100% stock truck, changing only the cooler." --Matt A. (SCT/Bullydog lead EcoBoost calibrator)

"I just wanted to let you guys know that y'all make a great product. The workmanship is outstanding, the welds are on point, and the intercooler is just plain badass! I have a 2011 ecoboost and I opted for the bov - it sounds awesome!! I also polished it to a mirror finish, looks great behind my black grille. thanks again."

"I thought I would send some pics of the intercooler on my truck if you needed anymore for advertising. This thing is amazing and keeps my IAT2 temps within 1* of ambient air temps no matter how it is hot outside. I truly love the product and how it looks on the truck also. Thanks. - Don Y

For additional information and/or related questions, feel free to contact us.

More Information
Sort ByIntercoolers
Product Name2017+ Gen2 F150 Raptor 3.5L EcoBoost Intercooler Kit
BrandFull Race
BrandsFull Race
Write Your Own Review
Write a Review2017+ Gen2 F150 Raptor 3.5L EcoBoost Intercooler Kit
To Top