2014 - 2020 BMW M3 M4 S55 F80 F82 F83 Bolt On Twin Turbo Upgrade
The Full Race BMW S55 Twin Turbo Upgrade Kit for M3 / M4 / M2 Competition is the ideal upgrade for your turbocharged BMW.
The Full Race BMW S55 Twin Turbo Upgrade Kit for M3 / M4 / M2 Competition is the ideal upgrade for your turbocharged BMW.
The BMW M3 / M4 S55 Bolt-On Twin Turbo Upgrade Brings OEM Reliability and More Horsepower
We spoke with and listened to BMW tuners, racers, and owners. It turned out what they wanted was OEM reliability, a simple install and a lot more top-end HP (with zero core charges). Manufactured using 100% OEM components from the original manufacturer and proven in DTM endurance racing, these are some of the finest bolt-on turbo upgrades to come through Full Race since our inception in 2003.
Full-Race BMW S55 Twin Turbo Bolt-On Upgrade Kit for M3, M4, And M2 Competition
Full-Race's BMW S55 twin turbos are purpose-built, stock-appearing, and stock-location performance upgrade. A true plug-and-play bolt-on from the OEM manufacturer. Nobody can visually tell these are not OEM without measuring upon disassembly. Utilizing a larger Mar-M turbine wheel with a billet compressor wheel, this turbo is designed for reliable top-end gains.
Manufactured with validated components from MHI (the OEM supplier to BMW) these are proven during 24H DTM endurance races. Each turbo is hand-built and high speed balanced for maximum reliability and durability. Wastegate actuators are pre-calibrated for easy installation. Stock tunes can be utilized with all stock components. For maximum gains, a custom tune is recommended.
Full Race BMW M3 / M4 S55 Turbo Upgrade (Tuned conservatively at DI limit)
Features
- Performance-optimized Billet compressor wheel with latest generation blade aero
- A direct bolt-on replacement; all connections to the vehicle utilize OE inlet and outlet to retain factory intake plumbing and exhaust routing.
- Manufactured with 100% brand-new OEM components—not remanufactured and no core charge
- Ready to install out of the box, with pre-set electronic wastegate
- Step-Gap oil seal on Turbine side
- Multipad Thrust Bearing Assembly
- Watercooled Center Section
MHI 56mm S55 Upgrade Compressor Map: 74lb/min Combined Max Flow Rate
Compressor Wheel Size:
- OEM: 51mm
- MHI: 56mm
Turbine Wheel Size:
- OEM: 43mm
- MHI: 47mm
MHI 47mm S55 upgrade turbine map
51mm OEM Compressor Map (right) vs 56mm MHI S55 upgrade compressor map (left)
Notice for California Residents: This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution-controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use may be a violation of local, state, and federal laws. It is the buyer's responsibility to verify the legal use of this product for the intended application and use.
If you have questions about this product or its installation, contact us.
SKU
FR-S55
WEIGHT
37.000000
BRAND
MHI
similar products

BorgWarner EFR 9274 Turbo

Barb Fittings and Breather Filter for 4 Port Boost Control Solenoid

CSF BMW S55 M3 M4 Dual-Pass Charge Air Cooler

BorgWarner Airwerks S372SX-E - 72mm Enhanced S300SX-E 9180 Turbo

Turbosmart N55 M2 / X4 / M40i Electronic EMÂ BOVÂ

Full Race 4 Port MAC Boost Control Solenoid

CSF BMW S55 M3 M4 Dual-Pass DCT Transmission Cooler

3 Port Boost Control Solenoid (BCS) Fittings and Breather Filter

Garrett PowerMax Direct Fit Intercooler Upgrade 2015+ BMW F80 M3 and F82/F83 M4

3 Port MAC Boost Control Solenoid (BCS)

CSF BMW F87 M2 Dual-Pass DCT Transmission Cooler

CSF BMW S55 M3 M4 Front Mount Heat Exchanger
For SHOP OWNERs
& KIT BUILDERs
Full-Race Motorsports is the most
trusted name in turbocharging.